PARSH NATH MANUFACTURERS

Call Today : +91 999-999-8081  |  +91 935-033-8190

  Download Catalogue

Home / Products / Vibrating Screens in Rajasthan

Vibrating Screens Manufacturers in Rajasthan

Screens for quarries, crushers and stone yards

We weave vibrating screens in-house under the SNAKE® Brand and send them to Rajasthan from Delhi, in spring steel, mild steel, GI wire and stainless steel. Rajasthan is a major stone and mining state, so the screens that matter most here are the ones working on a crusher or a stone yard. This page follows the material through a screening line and shows how to describe the screen you need.

From Raw Stone to Graded Product

On a screening line the rock first passes over a coarse screen that scalps off the biggest pieces. Finer screens below then sort what is left into graded sizes. Our openings run from 5 mm to 100 mm, so one range covers both ends: wide openings for the scalping deck and tighter ones for the sizing decks. The wire runs from 1 mm to 10 mm, and the screen is woven to whatever opening and wire size the deck needs.

The material on the deck, whether ore, crushed stone, sand, gravel, minerals or coal slag, is hard on wire, so abrasion resistance is built into how these screens are made.

A Worked Example of the Five Details

Every screen we make is specified with five details: overall width, length, opening, wire size and material, and edge preparation. As an example, a replacement for a worn deck might read: width measured over the hooks from outside to outside, the length of the deck, a 25 mm opening, 6 mm spring steel wire, and the same edge hooks as the old screen. If you are replacing a screen, measure the old one this way and keep it as a sample.

Widths go from 1 to 7 feet, and a single screen can run up to 105 feet in continuous length. The numbers above are only an illustration, not a standard size.

Choosing the Wire

Spring steel, mild steel, GI wire and stainless steel are all available, and other steels such as high carbon steel can be made on request. For the toughest decks, look at our spring steel and high carbon pages, and for the weave itself, crimped wire mesh, which keeps its openings accurate and is the weave usually preferred for vibrating screens.

Ordering for a Rajasthan Site

Send the five details, or a photo and the measurements of the old screen, and we will quote. Our vibrating screen page has the full specification, and industrial heavy screens cover larger openings. For everything else we supply in the state see wire mesh in Rajasthan. Phone +91-9999998081 or use the enquiry page.

Screen Questions

What is the difference between scalping and sizing?

Scalping removes the largest pieces on a coarse screen, while sizing sorts the remaining material into graded sizes on finer screens.

How long can one screen be?

The maximum continuous length is 105 feet, in widths from 1 to 7 feet.

What range of openings and wire sizes do you weave?

Openings from 5 mm to 100 mm and wire from 1 mm to 10 mm.

Can I order a replacement screen to match an old one?

Yes. Give us the width over the hooks, length, opening, wire size and material, and edge preparation of the old screen.